Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 


NACE MR0175/ISO 15156 NACE MR0175/ISO 15156, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production

All Standards | NACE Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: April 29, 2014
Updated On: July 08, 2014
Editorial Change:
 
A seven-year effort has resulted in the technical alignment of NACE Standard MR0175, "Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments," and ISO 15156, "Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production." NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. NACE MR0175/ISO 15156 consists of three standards, available through NACE as a complete package: Part 1: General principles for selection of cracking-resistant materials Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

We have added four (4) circulars to the NACE MR0175/ISO 15156 Addenda Package. MR0175-ISO 15156-Part 1 Technical Circular 1 (2014); MR0175-ISO 15156-Part 2 Technical Circular 2 (2014); MR0175-ISO 15156-Part 3 Technical Circular 3 (2014); MR0175-ISO 15156-Part 3 Technical Circular 4 (2014)

(Back to all Standards)

 
   
Advertisements
 
EMME Controls
 
EMME (Energy Management Made Easy)
 
• Achieve a zone in every room for 1/2 the cost
• Save up to 40% in energy consumption
• Works in any size building
• Can be installed in as little as a few days without remodeling
• Comfort results guaranteed in writing
 

 
Garland Company
 
Architectural Wall Coating Damproofs and Beautifies
 
Tuff-Coat™ multi-functional coating bridges hairline cracks, hides stains and discoloration, and reduces wall temperature, increasing the wall's life cycle.
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
Atlas Material Testing Technology
 
Helping You Put Your Products To The Test
 
  • Outdoor Accelerated Weathering
  • Laboratory Testing Services
  • Accelerated Weathering Instruments

  • www.atlas-mts.com
    atlas.info@ametek.com
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved