Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site


Problem Solving Forum

| More

Question posted - September 8 to September 12, 2014:

Where there is likely to be ponding water, what generic type of reflective roof coating will work best, and why?

More items for Building Envelope

Selected Answers

From GENE ROCKMAN of CFR LLC on September 16, 2014:
I have tried to find the best with easy installation. I found EPDM liquid rubber to be my choice to stand up to ponding water. The system is basically 3 steps: clean, prime, and, in your case, apply a top coat of EPDM liquid rubber. You can get a 3-year warranty if you do it yourself or up to 10 years with an authorized installer. It can then be recoated to extend the warranty if needed.

From Jeff Edson of EcoBiz on September 10, 2014:
Please search silicone coating permeability and you'll find an article from Paint & Coatings Industry magazine submitted by Wacker Silicones, a leader in silicone technology. It says silicone- based finishes offer two major benefits, "outstanding water vapor permeability and low water absorption."

From John T. Hull of Sherwin-Williams on September 9, 2014:
Be careful with silicones over known ponding areas. Silicones have near zero permeability, so they will not breathe. This, in turn, can lead to blistering on the exterior and possibly reduced air quality on the interior. A better method is to use tapered insulation boards to create positive drainage and eliminate the ponding altogether.

From Jeff Edson of EcoBiz on September 8, 2014:
Silicones are virtually unaffected by ponding water and UV exposure due to their inorganic nature.

From Jack Smart of John Smart Consulting Engineers on September 8, 2014:
I have a mansard roof on my house with multiple flat sections. A previous asphalt roof failed in five years at a seam in a ponded area, conveniently occurring just months after the gaurentee and causing extensive interior damage . It was replaced with a a light grey membrane roof which is working very well. It is also possible to put foam boards under the membrane to greatly reduce the volume of water which collects in ponds, which also greatly reduces the load on the roof after a rain. Because the membrane is so light-weight, we left the old roof in place and we definitely notice a cooler house.

Please sign in to submit your answer this question


Tagged categories: Roof coatings

Current PSF Question | Submit a PSF Question | Full PSF Archive

Keim Mineral Coatings
Mineral Silicate Paints + Stains Fuse to Concrete
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural

Shield Industries, Inc
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.

Novatek Corporation
Novatek Portable Air Filtration Systems
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!


Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com

The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker


© Copyright 2012-2018, Technology Publishing Co., All rights reserved