Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


Contractors Needed for FL Jail Complex Work

Monday, November 26, 2018

More items for Maintenance + Renovation

Comment | More

Sarasota County, Florida, is soliciting contractors for the pressure washing, waterproofing and coating of three buildings on the Sarasota County Jail Complex.

The jail was built in 1956, originally constructed with an apartment for the family of the sheriff that was in charge at the time. A second jail was constructed in 1975, and additional wings were built in 1985 and 2002.

This project is estimated to cost $2 million. The total estimated square footage for this project is approximately 180,000 square feet.

© Google Inc. 2018

Sarasota County, Florida, is soliciting contractors for the pressure washing, waterproofing and coating of three buildings on the Sarasota County Jail Complex.

Bids are due by Dec. 12.

Scope of Work 

The awarded contractor is responsible for the pressure washing, waterproofing, preparation and coating of the north, east and west buildings of the Sarasota County Jail Complex. However, the East Jail’s northeast wall is not part of this project.

When cleaning or preparing surfaces, the contractor is to remove all miscellaneous abandoned materials, as well as inspect and patch any surface imperfections. Stucco substrates are to be cleaned with a self-cleaning system unless directed otherwise. When removing any rust, loose paint or mildew, the contractor is to use methods of pressure washing, rotary-tip pressure washing or abrasive-blast cleaning where necessary. The contractor is advised to provide their own water or approved metering device while utilizing water resources from the county. Any loose of flaking coating remaining after these methods is to be removed as required.

Prior to coating, the contractor must remove all hardware and accessories on the exterior of the building. Any previously coated exteriors are to be prepared to have a “like-new” finish, complete with a smooth surface for transition. When applying coating or a polyurethane elastomeric sealant, the contractor is to provide their own painting supplies and equipment, such as brushes, paints, high lifts, scaffolding and sling stages.

Owner-approved brands include Sherwin-Williams and Florida Paints.

Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try Paint BidTracker free!

   

Tagged categories: Bidding; Contract awards; Contracts; Government; Government contracts; Jobs; Paint BidTracker; Upcoming projects

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved