Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


OSHA Reports on Irma's Toppled FL Cranes

Tuesday, October 23, 2018

More items for Good Technical Practice

Comment | More

A recent report by the U.S. Department of Labor’s Occupational Safety and Health Administration has found that the three cranes that collapsed last year after Hurricane Irma tore through Miami did so because of wind turbulence, a factor that the cranes were not designed for.

The three hammerhead tower cranes, Sk-315 models, were the only cranes out of more than 20 that failed during the storm.

What Happened

The first boom snapped around 10:30 a.m. on Sept. 10, 2017, and was soon joined by two more, after the storm had rolled through the Miami area.

The week prior, officials warned residents who live near cranes that Irma’s winds could prove dangerous. Residents were told to evacuate because of the danger the large cranes posed.

The deputy director of the building department for the City of Miami said in a statement that he would not advise staying next to a site that had a construction crane, noting that though the many of the cranes are certified to withstand a hurricane, that only goes so far.

The OSHA report suggests that though the cranes that fell were designed for maximum wind speeds of 95 mph, they were not necessarily designed for the wind turbulence. The report says that it was the lateral and upward wind loads that caused the jibs to separate from the equipment’s turntables and collapse.

One of the cranes was manufactured by Terex Peiner GmbH and the other two by Noell Service and Maschinenetechnick GmbH; the agency recommends that the manufacturers re-evaluate the jib-to-turntable connection design to prevent detachment during turbulent winds. It also recommends adding jib pendants to the SK-315 to provide more stability.

President of third-party inspection firm Crane Safety & Inspections Greg Teslia told the Engineering News-Record that everyone did everything right with the information they had; it just wasn’t enough for Irma’s winds.

“There’s really nothing that the contractors could have done to prevent this from happening besides dismantling the whole crane, which would’ve been impossible in the time they had,” he said. “These cranes aren’t made out of armor, and wind is their enemy.”

Now, several lawsuits are winding their way through the courts. L&R Structural Corp., the subcontractor of the Vice apartment complex and the site of the first crane breakage, is suing Maxim Crane Works, which rented out all three of the cranes. Related Group, a developer at both of the other two sites, is suing Maxim as well as Terex.

   

Tagged categories: Cranes; Disasters; Health and safety; OSHA; Safety

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved