Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


Contractors Needed for CA Fire Station Construction

Friday, February 23, 2018

More items for Maintenance + Renovation

Comment | More

The Moraga-Orinda Fire District is soliciting contractors for the general construction and related site improvements on a new fire station building in Orinda, California.

Fire Station 43 is planned to be a one-story wood-framed structure (34 feet by 74 feet) on the east side and a two-story (34 feet by 37 feet) at its lower level. The new structure will have three portions including an apparatus room for the fire engines and workout areas, a living quarter and an area for storage and utilities.

Shah Kawasaki Architects

The Moraga-Orinda Fire District is soliciting contractors for the general construction and related site improvements on a new fire station building in Orinda, California.

The total project is estimated to cost $3,317,441. Bids are due March 5.

Scope of the Coating Work

The contractor will be responsible for the application of one coat of primer and two coats of acrylic enamel to all exterior and interior metal surfaces. Any fiber cement siding shall be sealed with one coat of alkali-resistant primer and two coats of a 100 percent acrylic latex enamel application. Exterior and interior opaque wood surfaces are scheduled to receive one coat of an undercoat primer and two coats of 100 percent acrylic enamel. Stained wood surfaces will have a single coat of an exterior semi-transparent penetrating stain. Asphalt surfaces in the fire station’s garage will also require traffic line paint application consisting of two coats of a water-based acrylic/epoxy coatings system.

Interior gypsum board surfaces are to be cleaned and receive one coat of universal primer and two coats of an acrylic latex system. The contractor should coat the interior stained wood with a multi-coatings system consisting of one coat of wood stain, one coat sanding sealer and two coats of an acrylic modified urethane, filling any holes in between third and fourth coatings. Existing holes on transparent finished wood will be filled and cleaned before receiving one coat of bleached shellac and two coats of acrylic modified urethane rubbing varnish.

If any interior steel surfaces are expected to be exposed to jobsite conditions for more than six months, abrasive blast-cleaning to Commercial standard (SSPC-SP 6) will be required prior to coating application. Exterior or interior surfaces subjected to wet conditions, fumes or high-performance coatings, should be abrasive blast-cleaned to Commercial standard (SSPC-SP 6) or Near-White standard (SSPC-SP 10) prior to coating. All interior steel surfaces that are receiving fireproofing application will also be either hand-tool cleaned to SSPC-SP 2 standard or power-tool cleaned to SSPC-SP 3 standard. Acrylic or latex-rubber-modified acrylic sealant may also be required on interior surfaces.

Owner-approved brands include Benjamin Moore, Sherwin-Williams, Tnemec, PPG, ICI Glidden, Dunn-Edwards, Kelly Moore, Vista Paint and Frazee Paint. Approved equals will also be considered.

Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try Paint BidTracker free!

   

Tagged categories: Bidding; Contract awards; Contracts; Government; Government contracts; Jobs; Paint BidTracker

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
EMME Controls
 
EMME (Energy Management Made Easy)
 
• Achieve a zone in every room for 1/2 the cost
• Save up to 40% in energy consumption
• Works in any size building
• Can be installed in as little as a few days without remodeling
• Comfort results guaranteed in writing
 

 
Atlas Material Testing Technology
 
Helping You Put Your Products To The Test
 
  • Outdoor Accelerated Weathering
  • Laboratory Testing Services
  • Accelerated Weathering Instruments

  • www.atlas-mts.com
    atlas.info@ametek.com
 

 
Garland Company
 
Architectural Wall Coating Damproofs and Beautifies
 
Tuff-Coat™ multi-functional coating bridges hairline cracks, hides stains and discoloration, and reduces wall temperature, increasing the wall's life cycle.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved