Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


New Moisture Barrier Uses Nanotechnology

Wednesday, June 7, 2017

More items for Coatings Technology

Comment | More

Coating company Arisfor LLC (Grove City, Pennsylvania) has teamed up with nanotechnology company Integricote (Houston) for its new Arisfor Multi-Surface Waterproofer.

The company says that, because of the nanotechnology from the Integricote team, the new MSW forms a moisture barrier that integrates with the surface matieral, allowing it to provide protection against damage from water, acids and deicing salts.

According to the company’s press release, Integricote moved away from traditional sealing agents, already accumulating some notoriety for its solar panel coatings.

Arisfor LLC

The company says that, because of the nanotechnology from the Integricote team, the new MSW forms a moisture barrier that integrates with the surface matieral, allowing it to provide protection against damage from water, acids and deicing salts.

“Most sealing and coating formulations are polymer-based; they interact with the surface area they are designed to treat in a similar manner as paint, and will degrade under ultraviolet light over time,” said Shay Curran, professor of physics at the University of Houston and CEO of Integricote.

The nanotechnology binds the formula to concrete and masonry from the inside out, the company says, enabling the sealer to prevent corrosion, spalling and cracks caused by moisture, deicing salts and chemicals.

The spray-applied product is suited for commercial and residential use on building facades, parking lots, decks, driveways, curbs, loading docks and ramps, and concrete sidewalks and stairs. It can also be applied to tile, limestone granite, marble, slate and gravestones, the company notes.

The new Arisfor MSW formula aims to make the waterproofing process more efficient, needing only one coat and having a dry time of less than 30 minutes, according to the release.

The company also notes that, in contrast with the standard annual reapplication requirement, one application of Arisfor MSW could last from two to six years before reapplication is required.

For more information, visit arisfor.com.

   

Tagged categories: Barrier coatings; Moisture resistance; Nanotechnology; water damage

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved