Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


Tool Made to Measure Concrete Coatings

Tuesday, November 22, 2016

More items for Good Technical Practice

Comment | More

A U.K.-based inspection equipment manufacturer has launched a new tool for coating thickness inspection on concrete substrates.

The new Elcometer 500 Coating Thickness Gauge, made by Elcometer (Manchester), was developed for the non-destructive measurement of dry film thickness on concrete and other cementitious substrates up to 10mm thick, the company says.

Elcometer
Elcometer

Elcometer touts its new Elcometer 500 Coating Thickness Gauge as making the non-destructive measurement of dry film thickness on concrete more accurate, faster and and easier.

Elcometer says its new concrete gauge is capable of delivering 60-plus readings per minute in standard mode and more than 140 per minute in scan mode. The data can then be transferred via Bluetooth or USB PC software or mobile devices for instant report generation, it adds.

The device offers improved accuracy, the company notes, in that its signal strength indicator helps to prevent false or incorrect readings.

Its ergonomic design was intended to facilitate comfortable, continuous use for daily inspections, it adds.

Moreover, the company says the gauges and probes are rugged and appropriate for harsh environments, with a dustproof and waterproof design and field-replaceable probe wear tips.

According to Elcometer, the device is ready to use; a user can select the coating material and begin measuring without having to set up gates or range values.

The thickness gauge can be used in accordance with ASTM 06132, SSPC PA9 and ISO 2808, it says.

More information: www.elcometer.com.

   

Tagged categories: Cementitious; Coating inspection; Coating/Film Thickness; concrete; Concrete coatings and treatments; Elcometer; Equipment manufacturers; Inspection equipment; Thickness gauge

Comment from Adeel Ahmad, (11/23/2016, 6:00 AM)

We are checking the dry film thickness by PosiTector 200 which is not having accuracy. In this positector device , first we've to settle the required minimum and maximum value prior to place the probe on concrete coated surfaces. Things to keep in mind that DFT measurement never shown below to minimum value what you settled down even DFT is very thin and very less from acceptable limit. So how we can rely on POSITECTOR 200? Good news to get the measuring device from elcometer. Thanks,


Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved