Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site


D+D News

Main News Page

Tnemec Debuts Epoxy Primer

Friday, August 26, 2016

More items for Coatings Technology

Comment | More

A Kansas City, MO-based coatings manufacturer has launched a two-component, clear epoxy primer designed to offer superior penetration and adhesion to concrete.

Series 208 Epoxoprime MVT, made by Tnemec Company Inc., is a moisture vapor-tolerant, high solids epoxy primer for newly poured and existing concrete slabs.

According to Joe Schmit, director of the StrataShield flooring division, the primer is specially formulated to resist high pH and help protect the bond line between the floor topping system and the concrete surface.

Tnemec Series 208 Epoxoprime MVT

Tnemec’s Series 208 Epoxoprime MVT is a two-component, high solids clear epoxy primer that reportedly helps to reduce moisture from escaping new and existing concrete surfaces where elevated moisture vapor transmission levels are of concern, the company says.

“Moisture vapor-related coating failures in new and existing concrete are common,” Schmit explains. “Bubbling and blistering, which can lead to delamination of a coating system, occurs when moisture vapor travels upward through the concrete floor, carrying with it various highly alkaline components, such as salts and chlorides, which raise the pH and attack the coating system at the bond line.”

Schmit notes that even when concrete is at full strength and fully cured it remains porous, so moisture vapor transfer and high alkalinity may still be a concern.

Application and Topcoats

Applied at 16.0 to 20.0 mils dry film thickness (DFT), the primer reportedly penetrates the concrete surface to provide "excellent" adhesion and "ultra-low" permeability, helping to reduce moisture from escaping new and existing concrete surfaces where elevated moisture vapor transmission (MVT) levels are of concern.

Series 208 can be applied as early as 10 days after newly placed concrete is installed instead of the standard cure time of 28 days for other primers, the manufacturer says.

Following application, the product can be topcoated after six to eight hours of cure time at ambient temperatures, the company notes.

“A selected floor topping system is then recommended to provide the appropriate service for the intended environment and service considerations,” Schmit added. “The end result will be a resinous flooring system that resists moisture vapor transmission.”

Product Specifications

The 100 percent solids primer is said to conform to the volatile organic compound (VOC) requirements of every air district in the U.S., and its low odor enables its use in occupied areas, making it ideal for fast-track projects where sustainability is a consideration, according to Tnemec.

The company states that its primer withstands MVT up to 15 pounds in accordance with ASTM F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride.

It also reportedly withstands relative humidity up to 95 percent in accordance with ASTM F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes.

The primer also offers excellent resistance to high alkalinity levels up to pH 14, the company adds.

More information: www.tnemec.com/.


Tagged categories: Coatings Technology; Concrete floor coatings; Epoxy; Primers; Tnemec

Comment Join the Conversation:

Sign in to our community to add your comments.

Shield Industries, Inc
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.

Keim Mineral Coatings
Mineral Silicate Paints + Stains Fuse to Concrete
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural

Novatek Corporation
Novatek Portable Air Filtration Systems
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!


Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com

The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker


© Copyright 2012-2018, Technology Publishing Co., All rights reserved