Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


Flexmar Touts Polyaspartics Technology

Wednesday, April 13, 2016

More items for Coatings Technology

Comment | More

Flexmar Coatings (New Kensington, PA) has introduced a new line of polyaspartic coatings made for interior and exterior commercial, residential and light industrial concrete floor substrates, the company says.

The NextGen polyaspartic coatings line makes same-day application and return to service possible, according to Flexmar. Specifically, the system boasts a 25-minute working open time with a rapid 1-hour re-coat and 1- to 2-hour return-to-service interval, the company says.

Re-coat and return-to-service times remain consistent in ambient temperatures ranging from 0 to 100 degrees Fahrenheit and relative humidity up to 85 percent, according to the company.

Flexmar
Flexmar Coatings

The NextGen system is billed as durable, capable of applications in environments with high foot or vehicle traffic. Flexmar NextGen custom-color vinyl chip polyaspartic coatings system was applied in the showroom of Forza Motorcars in Lower Burrell, PA. Installation was done by Todd Slomka and Kevin Bertocki of U-NEEK Concrete Coatings in Tarentum, PA.

The zero-VOC, two-component line features factory-pigmented Flexmar NextGen Self-Prime HS color coats, Flexmar NextGen Clear Coat HS clear polyaspartic sealers and Flexmar NextGen Variegate HS polyaspartic stain-sealers.

They are combined along with decorative media and micro-media slip reduction agents to a durable and stain resistant finish, according to the manufacturer.

The company says the system is recommended for use in tight construction and renovation schedules, where the need to minimize revenue loss in retail settings, or the mission-critical nature of the floor surface for essential services like hospitals and medical facilities, fire and ambulance stations, schools and higher education facilities, airplane hangars and others.

Flexmar adds that the system has virtually no odor and can contribute toward satisfying LEED credits in the Indoor Environmental Quality category.

More information: www.FlexmarPolyaspartics.com.

   

Tagged categories: Coating chemistry; concrete; Concrete coatings and treatments; Concrete floor coatings; Flexmar; Polyaspartic

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved