Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


TQC Rolls Out 2 Defect Detector Models

Thursday, March 5, 2015

More items for Good Technical Practice

Comment | More

Coatings inspection instrument maker TQC has introduced two versions of a Low-Voltage Pinhole Detector that uses the "wet sponge technique."

The unit is used to inspect various coatings on conductive substrates for holidays, pinholes and other small defects. It is available in Basic (LD8100, 9V and 90V) and Advanced (LD8105, 9V, 24V, 67.5V and 90V) models.

TQCLVPinholeDetector
Photos: TQC

TQC's new Low Voltage Pinhole Detectors use the "wet sponge technique" to detect coating defects.

For each model, the grounding clamp is connected to an untreated piece of the substrate (which is electrically connected with the measurement area), where the wet sponge is used to probe the entirety of the coating with the selected voltage.

When current flows from the sponge wand to the grounding clamp, this indicates a defect in the coating. The user is notified using the selected feedback method(s): buzzer, vibration, headphones and/or display.

The number of detected pinholes is stored in memory and remains available after power down, even when replacing batteries. This memory can be cleared by the user.

Both models operate with a single button, measure up to 500 μm coating thickness, and have a full-color OLED display.

TQC notes that reliable and valid detection is possible only on clean coatings. Measurements on dirty, excessively wet or otherwise contaminated surfaces are unreliable, the manufacturer advises.

TQC, based in the Netherlands, designs and produces field measuring instruments and lab equipment for testing paint and coatings and general surface treatment.

More information: www.tqc.eu.

 

   

Tagged categories: Holidays; Instruments; Paint defects; Quality control; Testing + Evaluation; TQC

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved