Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


Commercial Coatings Play Catch-Up

Thursday, February 13, 2014

More items for Coatings Technology

Comment | More

ORLANDO—Sure, commercial coatings make a building look good, but their many other functions must be rigorously addressed with standards, or they risk losing ground to their industrial counterparts, experts say.

In “Commercial Contractor and Applicator Certifications,” a presentation Tuesday (Feb. 11) at SSPC 2014, Jeff Theo of Vulcan Painters Inc. made his case for trained, certified commercial painting contractors and applicators.

Theo also discussed SSPC's recently revised QP 9 Standard, as well as the efforts now underway for certifying applicators.

“It’s a common perception that industrial coatings provide corrosion protection, while commercial paints provide aesthetics,” Theo said at one of 10 sessions over two days on Assessing and Treating Building Components.

Jeff Theo

Until recently, the commercial painting sector has lagged behind the industrial sector, Jeff Theo of Vulcan Painters said at SSPC 2014.

The conference’s architectural track, sponsored by Durability + Design, was hosted by Ken Trimber, president of KTA-Tator Inc. and chair of SSPC’s Commercial Coatings Committee.

Theo chairs the Commercial Contractor Certification and Power Tool Cleaning subcommittees, as well as serving on the Standards Review Board. 

Only One Chance

Commercial coatings are for more than just aesthetics, Theo said. These coatings require very diverse specifications, and can provide environmental protection, improve energy efficiency and safety for a building’s occupants.

Like industrial protective coatings, commercial coatings are high-stakes materials. Defects and failures can "result in a wide array of building problems on the building components," Theo said.

For example, Theo pointed out, building problems can result from atmospheric moisture infiltration, which can rust structural steel, corrode reinforcing steel in concrete construction, decay wood structures, and contribute to mold and mildew growth.

Commercial coatings should thus be considered as part of the building system, not just an aesthetic treatment, Theo said.

“You only get one chance. …It can’t be an afterthought,” Theo said.

Looking at initiatives to improve and assure quality, the commercial painting sector has lagged behind the industrial sector—until recently, Theo said.

Closing the Gap

SSPC is making efforts to close this gap, such as the January 2014 revision of SSPC-QP 9, Standard Procedure for Evaluating Qualifications of Painting Contractors Who Apply Architectural Paints and Coatings, Theo explained.

commercial coatings
© iStock / ranplett

Commercial coatings offer more than just a pretty face, and their numerous building functions need to be addressed through standards, Theo said.

Revising QP 9 was the first priority for the Commercial Contractor subcommittee, part of SSPC's Commercial Coatings Steering Committee, which was formed in 2011.

The committee's mission is to develop independent, consensus-based standards for coatings selection, coatings application and surface preparation for the commercial, architectural and institutional sectors. 

The goal of QP 9 is to provide owners and specifiers with more qualified commercial painting contractors who can apply functional coatings, but there is still a critical component missing—a standard to qualify the individual applicator, Theo said.

Work is underway to address this issue, with an Applicator Certification Standard currently being drafted.

Pathways to Improvement

In 2008, SSPC and NACE published the joint standard, ACS 1, “Industrial Coating and Lining Application Specialist Qualification and Certification,” which provides criteria for the education, training, experience, knowledge, and skills required by an Application Specialist to prepare and apply protective coatings to steel and concrete surfaces of complex industrial structures.

The following year, SSPC published the Coating Application Specialist (CAS) Certification Program with “pathways” to individual certification through a combination of training, experience, and written and practical exams.

SSPC’s QP 1 (Field Application to Complex Industrial and Marine Structures) Program contains a provision to include CAS craft workers on eligible projects, steadily increasing the ratio of CAS to non-CAS workers through 2020.

The Applicator Certification Standard currently being drafted will contain a body of knowledge to address proper application of functional coatings products on the variety of substrates found in commercial structures. The body of knowledge will serve as the syllabus for applicator training programs.

ACS proposal
Jeff Theo

The draft Applicator Certification Standard details core competencies across four levels.

There will also be four levels of applicator certification, Theo said. 

Expanding Certification

SSPC has been working on developing contractor and applicator certification standards since 1986, when the association established the Painting Contractor Certification Program—a tool designed to provide facility owners with a way to independently prequalify painting contractors.

In 1989, the first qualification standard, QP 1, was published to evaluate the qualifications of industrial and marine painting contractors. An administrative program to certify contractors to QP 1 was also established that year.

Since then, a series of qualification procedures and revisions have come from SSPC: QP 2 for field removal of hazardous coatings; QP 3 for shop painting, QP 6 for metallizing, and QP 8 for polymer coatings on concrete.

It wasn’t until August 2008 that the SSPC Board of Governors approved SSPC-QP 9, adding commercial painting contractors to the certification fold.

   

Tagged categories: Architectural coatings; Certifications and standards; Commercial Construction; Paint application; SSPC 2014; SSPC Commercial Coating Committee

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved