Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

D+D News

Main News Page


New Report Aimed at Nanomaterial Safety

Wednesday, November 13, 2013

More items for Coatings Technology

Comment | More

Federal health and safety officials have released a new guidance document aimed at controlling worker exposure in the development of nanomaterials, which are being used in a range of new products, including paints and coatings.

Hundreds of new products spawned from nanomaterials have included little research on controlling worker exposure to the microscopic wonders—a gap that the National Institute for Occupational Safety and Health aims to fill with a new series of recommendations.

"Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes," released Friday (Nov. 8), identifies strategies to control worker exposure during the production or use of engineered nanomaterials—materials that are intentionally produced and have at least one primary dimension less than 100 nanometers.

"As we continue to research the health effects produced by nanomaterials, particularly as new materials and products continue to be introduced, it is prudent to protect workers now from potential adverse health outcomes," said John Howard, M.D., director of NIOSH.

NIOSH nanomaterial recommendations
Photos: NIOSH

NIOSH recently issued a new report aimed at controlling occupational exposure to nanomaterials, which currently lack standards for exposure.

"Controlling exposures to occupational hazards is the fundamental method of protecting workers," Howard said.

Filling a Gap

More than 1,000 consumer products, from coatings to electronics to makeup, now contain nanomaterials, according to NIOSH.

Since nanomaterials may have different properties than larger counterparts of the same material, producers and users must work to ensure a safe and healthy environment when bringing these materials to market, NIOSH said.

"Studies have indicated that low-solubility nanoparticles are more toxic than larger particles on a mass-for-mass basis," the Centers for Disease Control and Prevention reports.

Nanotechnology
NIOSH

Nanomaterials are currently used in more than 1,000 consumer products, according to NIOSH.

The U.S. has no established regulatory occupational exposure limits for nanomaterials. Other countries have established standards for some nanomaterials, and some companies have supplied OELs for their products, the report says.

Overall, however, the lack of regulatory standards and recommendations makes it difficult to determine or estimate a safe exposure limit, NIOSH says.

Hierarchy of Controls

The new report aims to provide science-based guidance that employers and workers can apply now, while research on exposure mechanisms and effects continues.

The report notes, for example, the traditional hierarchy of controls: elimination, substitution, engineering controls, administrative controls and personal protective equipment.

Identifying and adopting control technologies in other industries has also been effective; however, NIOSH calls evidence of control effectiveness for nanomaterial production and downstream use "scarce."

"Our hope is that this document will aid in the selection of engineering controls for the fabrication and use of products in the nanotechnology field. As this field continues to expand, it is paramount that the health and safety of workers is protected," said Howard.

Hierarchy of controls

Since nanomaterials are usually selected for their unique properties, eliminating them is unlikely, NIOSH said.

The toxicity of nanoparticles can be affected by several properties, including size, shape, chemistry, surface properties, agglomeration, biopersistence, solubility, and charge, as well as effects from attached functional groups and crystalline structure.

The report recommends and describes controls for processes such as reactor operations and cleanout processes, small-scale weighing and handling of nanopowders, intermediate and finishing processes, and maintenance tasks.

Recommended Exposure Limits

While human health effects from exposure have not been reported, NIOSH says that a number of laboratory animal studies have been conducted, showing pulmonary inflammation in exposure to titanium dioxide (TiO2) and carbon nanotubes, which have shown a response in mice similar to asbestos. Other studies have shown that nanoparticles can translocate to the circulatory system and the brain, causing oxidative stress.

NIOSH has published current intelligence bulletins on occupational exposures to TiO2 and carbon nanotubes and nanofibers, recommending exposure limits of:

  • 2.4 mg/m3 for fine TiO2 and 0.3 mg/m3 for ultrafine TiO2, as time-weighted average concentrations for up to 10 hours per day during a 40-hour work week; and
  • No more than 1 µg/m3 for exposure to carbon nanotubes and nanofibers.

Seeking Substitutions

Because nanomaterials are selected for their unique properties, NIOSH recognizes that eliminating them may not be possible; therefore, the agency recommends substitution of less hazardous materials when possible. Substitutions may include the same material in a different form.

When substitution isn't feasible, NIOSH recommends engineering controls, such as local exhaust ventilation, isolation measures and dust suppression.

Administrative controls and personal protective equipment are the next step when engineering controls cannot effectively control hazards or reduce exposures to an acceptable level. However, these measures can be costly and have proved less effective, also requiring significant efforts by workers, NIOSH says.

The Centers for Disease Control and Prevention offers more information on nanotechnology in the workplace here.

   

Tagged categories: Coating chemistry; Hazards; Health and safety; Nanotechnology; NIOSH; Titanium dioxide

Comment from will manning, (11/13/2013, 9:52 AM)

Will this spawn another RRP rule for remodelers? If so, will containment requirements be even tighter than RRP given the potential for airborne NANO particle to circulate in the workspace and beyond? Does anyone have any insight?


Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved