Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

DURABILITY + DESIGN BLOG

Comment |

Tips for Testing Paint Colors

MONDAY, OCTOBER 10, 2016

By Barbara Jacobs


More items for Color + Design

Q: Are you about to make decisions about paint color?

Q: Painters and designers: Are you about to recommend paint colors for a client?

Q: How can you make high quality color test samples to help your clients make color decisions?

This post will attempt to help you out! Providing some tips for testing.

Perhaps you are a painting professional who has just been asked for the thousandth time, “How will it look?”

Of course, you may have even seen the specified color in many other settings over the years—or, perhaps you’ve never seen it yourself in “real life.” Do you have time to test a lot of color swatches for your clients?

testing color
© iStock.com / eurobanks

Be sure to do the test with the same finish (i.e., flat, semi-gloss, eggshell, high gloss) you’ll be using on the actual surface.

Whether you are doing this yourself or perhaps even suggesting that the client do it and let you know what they want to use (and some people will actually want to do this), I’d like to share a few tips that you can recommend, or even use yourself if they are new to you.

It’s not rocket science; we all know that.

Keep it Simple

So, to keep it simple, I recommend starting with the premise that color looks different in all types of lighting and throughout the day—and evening—on different surfaces. Color changes in corners, also, as it intensifies where two walls of the same color meet, and it changes in other ways when two walls or surfaces (i.e., wall and ceiling) of differing colors meet.

It’s the angle that does it—whether the typical 90 degrees or something else, as in a vaulted ceiling, and the reflection of light causes the colors to affect each other.

Therefore, the following apply:

1. Make the paint test on a moveable and repositionable surface. Use something that can be affixed temporarily to any wall, ceiling, or even floor (when you are painting a floor).

Note: do not use your blue tape on the edges of this! Tape the back side only.

2. Make the colored surfaces in proportion to each other. For example, trim colors will usually be narrower than the wall color surfaces.

3. Be sure the surface you paint the test on is primed, or at least under-painted with a color similar to what you’re testing. For example, you can use poster board but since it’s paper, it must be oil-primed so it does not warp. Personally I like the flat-finish, fast drying low odor products for this.

Note: I’ve typically prepared up to 20 or so poster boards with this type of oil primer, to have ready to go in advance–and easy to use at a moment’s notice–when preparing color tests for clients.

4. Roll on two coats of your finish (test) color, making the application as close to what you intend to do on the final surface. Use a roller with similar pile to what you plan to use on the job.

5. Use a stable surface with a texture similar to the wall or surface to be painted. IF the target surface is textured, it’s worth it to make a replica since color reacts so differently with the light falling on textured or smooth surfaces.

6. Be sure to do the test with the same finish (i.e., flat, semi-gloss, eggshell, high gloss) you’ll be using on the actual surface.

7. Label your sample cards and cut a nice, smooth-edged sample about 8 inches by 8 inches to leave with the client for their own “shopping” purposes. I find that people appreciate this especially when they are looking at window treatments and furnishings.

Materials for Sampling

OK, so what about materials for the sample surface? You can use wood, (smooth and primed, of course), poster board and foam core (oil prime first), and you can use other substrates like gator board, or drywall (also prime).

One that I personally really like to use and always recommend to my clients who want to do the testing themselves is Small Wall. It’s a great surface, prepared for paint (in other words, no priming needed). It is 1-foot square (two in a pack), has a re-positionable adhesive strip on the back, and can be reused and re-painted. You can even cut it with a solid paper cutter, to make smaller pieces, and hole-punch if that’s how you keep color records. I think they also sell contractor packs of 50, which makes it a very easy process.

Exterior Suggestion

Whether your project is interior or exterior, the same process applies. However, for exterior work you might want to have some siding pieces available that are at least very similar to the client’s house if not the exact same thing.

Doing more than just one strip (minimum four to six strips high, of clapboard style) will give a more accurate view of what the shadows will do at various times of day. Remember to make trim samples also, in the same widths as the actual trim and casings or other details.

So, you might ask, why go to all this trouble, anyway? The main reason is: Minimize confusion, make the color choices easy, and be professional. Stripes and color patches on the walls look messy and are visually confusing.

You can’t see the specified colors next to each other on a large enough surface because there is just too much going on and the existing colors will inform the appearance of the tested colors.

Further Guidance, Illustrations

1. Block the other colors by hanging a white sheet, using white paper, or painting a white primer background.

Note: Using a roller is best to get the most solid coverage (yes, apply two coats) and no streaks. The point is to replicate the actual color appearance of the final surface.

2. Patches are confusing—use one color at a time. This is a useless waste of time, money and emotion. Let’s hope it’s just done for the sake of this picture and not to actually suggest testing colors like this!

swatches
© iStock.com / IPGGutenbergUKLtd

Testing swatches directly on the wall creates confusion and is detrimental to the process.

3. Place your reviewed color in corners, next to walls, next to ceiling if possible, next to floor or baseboards, next to doorway to see adjacent rooms with the proposed new color you’re reviewing.

4. This is another ineffective test, using colors that are too close together, not painted solidly so they look streaky, and not masked from the background. It’s hard to tell what the new colors actually are!

Image courtesy of author

4-a: Mask the wall with white, make a large, rolled paint sample. Doing this on a separate card or large poster board will give you an idea of the actual color. Can you tell which one this is, from picture 4?

Image courtesy of author

4-b: Same process as 4-a. Which of the two “tested” colors is this one?

Image courtesy of author

There is one more thing you can offer, that some painters have even used as their palette application guidelines: You can order a digital rendition of what the house will look like (exterior) with the various colors on the different parts of the house. That’s a great way to show a couple of color options in an overall visual.

Editor’s note: A version of Barbara’s blog post first appeared on her website, integralcolor.com.

 

ABOUT THE BLOGGER

Barbara Jacobs

Can we talk?...about color, that is. That’s our objective with this ongoing discussion—a Color Exchange, if you will—in this Durability + Design blog. Whether we know it or not, color affects all of us, in many ways. So let’s engage in this exchange and explore this mysterious and exciting subject of color, its effects, and its applications.

SEE ALL CONTENT FROM THIS CONTRIUBTOR

   

Tagged categories: Aesthetics; Color; Color guides; Color matching; Color selection; Design; Interior design

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
Keim Mineral Coatings
 
Mineral Silicate Paints + Stains Fuse to Concrete
 
• Forms permanent chemical bonds
• Becomes part of the concrete
• Will never peel
• Looks completely natural
 

 
Shield Industries, Inc
 
FireGuard® E-84 Intumescent Coating - Shield Industries, Inc
 
Trust the certified protection of the industry’s most innovative intumescent coating FireGuard® E-84 to provide you with the 1 and 2 hour fire ratings you need.
 

 
Novatek Corporation
 
Novatek Portable Air Filtration Systems
 
Air Scrubbers/Negative Air machines for restoration, abatement, dust & odor control, hazardous contaminant removal from job sites to clean rooms and hospitals. Portable, affordable!
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved