Durability + Design
 
About  |  Subscribe  |  Advertise  |  Connect 
Follow us on Twitter Like us on Facebook

 


Specifying Fire-Resistive Coatings

All Upcoming Webinars
All Webinars


Specifying Fire-Resistive CoatingsSponsored by Contego International Register Now

Tuesday, November 13, 2012; 11:00 AM - 12:00 PM Eastern
Cost: FREE

There are a variety of fire-resistant coatings available for the protection of exposed structural steel in buildings. This webinar will address the selection, use and installation of intumescent, fire-resistive coatings.

Course objectives include the following: 1) Describe how intumescent coatings protect underlying steel from heat exposure; 2) List two fire rating classification tests that are used to qualify intumescent coatings for use in building construction; 3) Identify two primary resin types that are used to formulate intumescent coatings; and 4) Explain how steel size and structure design affect specified thickness and number of coats. Participants are eligible for one AIA LU/HSW credit.
Downloadable File:
(right-click and choose 'Save Target As' to download; all downloads are copyright of their author.)
Presenters:

Jayson Helsel, Senior Coatings Consultant
KTA-Tator

Jayson Helsel is a senior coatings consultant with KTA-Tator, Inc. He holds an MS in Chemical Engineering from the University of Michigan, is a registered professional engineer, an SSPC Protective Coatings Specialist, SSPC Certified Concrete Coatings Inspector, and a NACE Certified Coatings Inspector.

At KTA, Helsel manages coating projects, performs failure investigations and coating surveys, writes coating specifications, and is a regular instructor for KTA coating inspection courses. He previously served as a Lieutenant Commander in the U.S. Coast Guard with experience in marine vessel inspection.

Jayson Helsel, Senior Coatings Consultant
KTA-Tator

Jayson Helsel is a senior coatings consultant with KTA-Tator, Inc. He holds an MS in Chemical Engineering from the University of Michigan, is a registered professional engineer, an SSPC Protective Coatings Specialist, SSPC Certified Concrete Coatings Inspector, and a NACE Certified Coatings Inspector.

At KTA, Helsel manages coating projects, performs failure investigations and coating surveys, writes coating specifications, and is a regular instructor for KTA coating inspection courses. He previously served as a Lieutenant Commander in the U.S. Coast Guard with experience in marine vessel inspection.

Sponsor:

Contego International

Contego was formed in 2000 for the express purpose of seeking out the best fire prevention products available and expanding their use through refinement, education and exposure. Most of Contego's products come from niche industrial sectors where they have been used successfully for years and sometimes decades. Contego acquires the products then refines them to make them more user friendly. The benefits of these tested products are then made available to broader consumer and commercial markets.


Register Now


Tagged categories: Fire; Fire-resistive coatings; KTA-Tator; Structural steel

 
 
 

Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2015, Technology Publishing Co., All rights reserved