|
D+D Online Feature - September 2012 - Cynthia L. O’Malley
|
|
|
PWC November/December 2010 - Rodney Conn
|
|
|
PWC January/February 2010
|
|
|
December 2009
March 2009 - Bob Brenk, Aldo Products Company Inc.
January/February 2009
January/February 2009 - Michael Gibbons, Architectural Systems Inc.
2008 - Allen Zielnik, Atlas Material Testing Technology, LLC
2008 - Charles H. Holl, Dayton Superior Corp.
2007 - Charles H. Holl, Technical Specialist, Dayton Superior Corp.
2007 - Allen Zielnik, Atlas Materials Testing Technology LLC
2007 - Jayson L. Helsel, P.E.
2007 - Joe Maty, JAC Editor
2006 - Allen Zielnik, Atlas Materials Testing Technology LLC
2006 - Allen Zielnik, Atlas Materials Testing Technology LLC
2005 - Allen Zielnik
2005 - Allen Zielnik
See more

|
|
|
|
|
|
October 24, 2012
|
|
|
August 22, 2012
|
|
|
August 9, 2012
|
|
|
April 9, 2012
ASTM Publishes New Edition of Venerable Paint, Coatings Test Manual
December 16, 2011
NCFI Says Spray-Foam Insulation Earns ICC Approval Under 2012 Building Code
November 8, 2011
ASTM Committee Developing Standard on Testing of Coil-Coated Building Products; Participants Invited
July 29, 2011
ASTM Proposes Standard for Water Beading in Architectural Coatings
July 6, 2011
ASTM Invites Participants for Development of Mold-Resistance Ratings Standard for Exterior Building Materials
June 20, 2011
ASTM Indoor Air Panel Plans Workshop on Test Methods for SPF Insulation Emissions
June 13, 2011
ASTM Sets Open-Time Standard, Revises Test of Humidity Effect
April 11, 2011
ASTM Issues New Coating Standard on Measuring Concrete-Surface Profile
March 14, 2011
ASTM Standard on Testing Wall Coatings Revised
February 25, 2011
ASTM Issues Standard on Roof Assessment, Preparation Prior to Coating
December 6, 2010
Tech Bulletin Details Key Air-Barrier Test Procedures
October 21, 2010
ASTM Panel at Work on Steel-Lifecycle Standards
July 15, 2010
Thomas Langill to Head ASTM Panel
April 13, 2010
Fletcher Named ASTM D01 Chairman
March 26, 2010
Standard Sets Additive Terminology
January 19, 2010
Nuclear Scientist to Chair ASTM
January 13, 2010
ASTM Adds Certification Programs
December 2, 2009
ASTM Panel Issues 2 New Paint Standards
September 30, 2009
ASTM Releases New Building Codes
June 25, 2009
ASTM Seeks Cavanaugh Nominees
April 2, 2009
ASTM Bestows International Merit Award
March 25, 2009
ASTM Recruiting for New Sustainability Panel
February 24, 2009
See more

|
|
|
|
|
|
|
|
|
Get Today’s Research Today
Wednesday, September 26, 2012
Materials Mettle
Wednesday, September 19, 2012
Free Standards Tracking
Wednesday, September 12, 2012
Leading-Edge Materials Performance
Wednesday, August 29, 2012
Keeping on Top of New Standards
Thursday, August 23, 2012
See more

|
|
|
|
|
What organization is collaborating with ASTM on development of a building enclosure commissioning process?
Friday, November 16, 2012
ASTM has a “plastic sheet method.” What is its purpose?
Wednesday, September 19, 2012
According to ASTM D 6083, what should be the minimum dry film thickness for elastomeric acrylic, cool roof coatings?
Thursday, August 16, 2012
True or false: ASTM has test methods for measuring the air barrier performance all of the following: materials, assemblies, and whole buildings.
Tuesday, July 31, 2012
True or false: The ASTM test method for pull-off adhesion of coatings is the same for both metal and concrete.
Wednesday, July 18, 2012
True or false: Requiring several thousand hours of successful performance in a salt fog test (ASTM B 117) is appropriate for specifying an immersion lining in a potable water tank.
Thursday, June 21, 2012
What is the scope of ASTM Committee D33?
Friday, May 11, 2012
True or false: Cyclic corrosion testing of protective coatings in the laboratory is now considered a better indicator of field performance than the traditional salt fog test, ASTM B 117.
Tuesday, May 8, 2012
True or false: ASTM recommends the same test method for both concrete and steel substrates to determine the adhesion of a coating using pull-off test devices.
Tuesday, April 17, 2012
The ASTM pencil hardness test can be used to determine what about a coating?
Friday, February 24, 2012
What ASTM Committee deals with nuclear coatings?
Tuesday, November 22, 2011
ASTM International’s Committee D-1 is developing its first-ever standard for what?
Thursday, September 8, 2011
True or false: ASTM has separate test methods for steel and concrete substrates in determining the pull off adhesion of coatings.
Friday, July 22, 2011
True or false: ASTM has a test method for evaluating the adhesion of a coating by cutting and probing it with a penknife.
Monday, May 23, 2011
True or false: There is an ASTM test method for comparing relative performance of concrete repair mortars in their resistance to cracking.
Thursday, May 5, 2011
True or false: ASTM has a test method to determine the relative performance of repair mortars in their resistance to cracking.
Tuesday, May 3, 2011
ASTM C 840 describes what type of finishing?
Tuesday, April 12, 2011
True or false: ASTM publishes descriptions of solvent rub tests for both inorganic and organic coatings, which are sometimes used to assess degree of cure.
Tuesday, March 1, 2011
See more

|
|
|
|
**Commercial white papers, product videos, and other sponsored documents posted on this site are
paid content from third-party companies; inclusion and posting on this site
does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare.
By signing in and viewing or downloading this paid content, you agree to make your name and full contact
information available to the sponsor of the content.
|
|
|

New Dow Corning® 3055 Resin
Ensure long-term asset protection and extend repaint cycles with a low-VOC, two-coat polysiloxane coating featuring superior corrosion and moisture resistance.

Paint Occupied Spaces with Less Disruption.
Benjamin Moore Ultra Spec 500 is an interior paint that incorporates a zero VOC waterborne colorant system. Available in a wide range of sheens & unlimited colors. www.benjaminmoore.com
watch video:

Sustainable Attractive Flooring Solutions
EPOXY/QUARTZ/OVERLAY /METALLICS/SEALERS
The source with a vested interested in your success,
providing you high performing, versatile concrete surfacing products. 866-622-7031

Fast Cure Concrete Repair Polymer
VersaFlex Quick Mender® repairs concrete cracks and spalls in UNDER 10 minutes. Low viscosity formulation PENETRATES DEEP into concrete. CALL 855-262-3495
.jpg)
Head Customers Don’t Like Dust
When you’re repainting, scraping, patching and sanding can be really messy. Keep dust under control with the ZipWall dust barrier system. It’s great for business.

Why Replace Your Roof When You Can Restore It?
ALDOCOAT 400 – the enduring, cost effective and eco-friendly solution for roof systems. Cool Roof Rating Council rated, ENERGY STAR and Miami-Dade approved. Call 800.474.6019.

For Tough Environments, The Toughest Protection
A workplace exposed to vehicle traffic, fuel, and other harsh chemicals needs a floor coating that stands up to daily abuse. Wearcoat 100 high-build polyurethane provides superior protection.
|
|