Durability + Design
 
About  |  Subscribe  |  Advertise  |  Connect 
Follow us on Twitter Like us on Facebook

 

The D+D Guide to ASTM

| More

Daily Quiz (25)

All content matching this tag

True or false: A pull stub is part of a destructive test apparatus used to measure the dry film thickness of coatings.

Wednesday, April 8, 2015


What organization published a revised standard in 2012 on measuring dry film coating thickness that focuses on frequency of measurements and acceptablility of acquired results?

Tuesday, October 28, 2014


What organization developed a standard practice for building enclosure commissioning?

Friday, September 20, 2013


What ASTM technical committee has a subcommittee that deals with air barriers?

Wednesday, September 18, 2013


True or false: The ASTM standard test method for measuring pull-off adhesion of coatings on concrete is the same one used for measuring pull-off adhesion of coatings on steel.

Wednesday, January 9, 2013


What ASTM committee deals with performance of buildings as its main subject?

Wednesday, December 5, 2012


What is revealed by ASTM’s “Anhydrous Calcium Chloride (ASTM F1869-11)-Floors?”

Tuesday, November 20, 2012


What organization is collaborating with ASTM on development of a building enclosure commissioning process?

Friday, November 16, 2012


ASTM has a “plastic sheet method.” What is its purpose?

Wednesday, September 19, 2012


According to ASTM D 6083, what should be the minimum dry film thickness for elastomeric acrylic, cool roof coatings?

Thursday, August 16, 2012


True or false: ASTM has test methods for measuring the air barrier performance all of the following: materials, assemblies, and whole buildings.

Tuesday, July 31, 2012


True or false: The ASTM test method for pull-off adhesion of coatings is the same for both metal and concrete.

Wednesday, July 18, 2012


True or false: Requiring several thousand hours of successful performance in a salt fog test (ASTM B 117) is appropriate for specifying an immersion lining in a potable water tank.

Thursday, June 21, 2012


What is the scope of ASTM Committee D33?

Friday, May 11, 2012


True or false: Cyclic corrosion testing of protective coatings in the laboratory is now considered a better indicator of field performance than the traditional salt fog test, ASTM B 117.

Tuesday, May 8, 2012


True or false: ASTM recommends the same test method for both concrete and steel substrates to determine the adhesion of a coating using pull-off test devices.

Tuesday, April 17, 2012


The ASTM pencil hardness test can be used to determine what about a coating?

Friday, February 24, 2012


What ASTM Committee deals with nuclear coatings?

Tuesday, November 22, 2011


ASTM International’s Committee D-1 is developing its first-ever standard for what?

Thursday, September 8, 2011


True or false: ASTM has separate test methods for steel and concrete substrates in determining the pull off adhesion of coatings.

Friday, July 22, 2011


True or false: ASTM has a test method for evaluating the adhesion of a coating by cutting and probing it with a penknife.

Monday, May 23, 2011


True or false: There is an ASTM test method for comparing relative performance of concrete repair mortars in their resistance to cracking.

Thursday, May 5, 2011


True or false: ASTM has a test method to determine the relative performance of repair mortars in their resistance to cracking.

Tuesday, May 3, 2011


ASTM C 840 describes what type of finishing?

Tuesday, April 12, 2011


True or false: ASTM publishes descriptions of solvent rub tests for both inorganic and organic coatings, which are sometimes used to assess degree of cure.

Tuesday, March 1, 2011


**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

   

Dumond Chemicals Inc.
SMART STRIP™ PRO

delivers the superior performance professionals are looking for when removing even the most difficult high-performance coatings and lead paint. This product is low VOC, low odor; biodegradable and user friendly.


Armorthane
Corrosion Coatings for Protection and Repair

Buy POLYURETHANE or POLYUREA coatings and spray surfaces for years of proven chemical resistance, water- and weather-proofing, and structural improvements.


Garland Company
Architectural Wall Coating Damproofs and Beautifies

Tuff-Coat™ multi-functional coating bridges hairline cracks, hides stains and discoloration, and reduces wall temperature, increasing the wall's life cycle.


Chicago Corrosion Group
Vendor-neutral corrosion consulting

What you don’t know about painting is costing you a fortune. Call today to see how CCG’s vendor-neutral, owner’s advocacy saves our clients millions.


AIA Convention


AGC Chemicals
LUMIFLON®FEVE Resins Are The Subject Of School Roof Restoration

Ideal for school roofs, LUMIFLON based coatings
can last up to 30 years
without fading, offering a low-maintenance solution
that retains color and gloss
and can be field-applied.


KTA-Tator, Inc. - Corporate Office
KTA Laboratory Services

Fully equipped lab to solve
the most challenging
coatings problems.
Contact:
Kevin Brown, 336-874-2651
Corporate:
1-800-245-6379 x208

 

Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2015, Technology Publishing Co., All rights reserved