Durability + Design

Building Performance and Aesthetics

A Product of Technology Publishing
JPCL/PaintSquare | D+D | Paint BidTracker

Subscribe to D+D Magazine

Daily Quiz

| More

Quiz Leaderboard: 22 questions from 9/24 - 10/24/2014    |   Full Leaderboard
Sign in to track your quiz score!

  • 1. Bryon Beck (21 answered correctly)

  • 2. Ronald Beebe (21 answered correctly)

  • 3. Volker Mellor (21 answered correctly)

  • 4. Ronald Syme (21 answered correctly)

  • 5. willem van Gent (21 answered correctly)

  • 6. burrows ben (21 answered correctly)

  • 7. Mark Gierke (21 answered correctly)

  • 8. Douglas Pearce (21 answered correctly)

  • 9. Mark Anater (20 answered correctly)

  • 10. Dan Baribault (20 answered correctly)

  • 11. Dave Heyne (20 answered correctly)

  • 12. William Turcotte (20 answered correctly)

  • 13. Perry Foreman (19 answered correctly)

  • 14. Brian McEwen (19 answered correctly)

  • 15. Robert O'Neil (19 answered correctly)

  • 16. Peter Farrell (18 answered correctly)

  • 17. Roland Peemans (18 answered correctly)

  • 18. arieh calahorra (18 answered correctly)

  • 19. Farooq Ahmed (17 answered correctly)

  • 20. Robert Wahlin (17 answered correctly)


Tuesday, February 26, 2013

What is saponification?

Amine blushing
White rust or wet storage staining on galvanized surfaces
Coating degradation caused by a high alkaline surface
Coating failure caused by the wrong mix ratio of 2-component coatings

Log in or register to PaintSquare save your results and track your cumulative quiz score!

   


Previous Quizzes from the Past Week

Monday, February 25, 2013
Both mechanical loads from heating and cooling equipment and the stack effect of conditioned air rising or settling can contribute to air and water leaks through holes in building envelope materials. What’s another contributor?

Friday, February 22, 2013
True or false: A barrier EIFS system creates a means of water drainage between the wall cladding and the insulation board.

Thursday, February 21, 2013
True or false: The Sealant Waterproofing and Restoration Institute (SWRI) has a Wall Coating Validation Program “to provide specifiers and end-users of wall coating products an unbiased method to judge whether wall coating products will perform at the levels of the manufacturer’s published data sheet for that particular product.”

Wednesday, February 20, 2013
True or false: The 2012 International Energy Conservation Code (IECC) does not require the use of air barriers.


More previous quizzes

Coatings For Industry, Inc.
For Tough Environments,
The Toughest Protection

A workplace exposed to vehicle traffic, fuel, and other harsh chemicals needs a floor coating that stands up to daily abuse. Wearcoat 100 high-build polyurethane provides superior protection.


DuPont Building Innovations
DuPont™ Tyvek® Fluid Applied WB System

The DuPont™ Tyvek® Fluid Applied System was put to the test at the new Texas A&M Liberal Arts and Humanities building Click to see the results.


KTA-Tator, Inc. - Corporate Office
KTA Inspection Instruments

Eliminate Application Uncertainties:
• Moisture Content
• Ambient Conditions
• Surface Preparation
• Coating Thickness
Call 1-800-KTA-GAGE
(800-582-4243)


PPG  Architectural Coatings / Porter Paints / PGH Paints
Property Maintenance Solutions

Glidden Professional at The Home Depot® provides property managers with professional paint recommendations, project planning and FREE jobsite delivery.


Chemique Inc.
Paint Removal Made Easy!

Remove multiple coats in one application. Easy to use and safe. All products meet or exceed V.O.C. regulations. Contain no methylene chloride, methanol or petroleum distillates.


BASF
New resins from BASF will have metals loving water:

Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
polyorders@basf.com
800-231-7868


Dumond Chemicals Inc.
LEAD STOP®
Lead Encapsulating Compound

is a thick elastomeric coating that is made to be a long lasting barrier over lead-based paint. LEAD STOP® provides a protective barrier coat that seals and locks in lead that is contained in old lead-based paints on previously painted surfaces.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE D+D:      Interact   |   Blogs   |   Resources   |   Buying Guides   |   Webinars   |   White Papers   |   Classifieds
GET D+D:      Subscribe   |   Advertising Media Kit
KNOW D+D:      About D+D   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2010-2014, Technology Publishing, Co., All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com