Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

Advertisement

Durability + Design (D+D)


D+D News

Main News Page


Feds Urge Curbs on Nano Exposures

Monday, May 6, 2013

More items for Coatings Technology

Comment | More

Nanotechnology may be the future of paints and coatings, but federal health officials are recommending strict limits on worker exposures to some of those tiny particles.

How strict? New exposure guidelines for carbon nanotubes and nanofibers set safe levels for workers at nearly zero.

The guidelines, published April 24 by the National Institute for Occupational Safety and Health (NIOSH), suggest limiting worker exposure to just one microgram per cubic meter of air per eight-hour workday.

NIOSH - Current Intelligence Bulletin 65

The bulletin includes toxicology data and strategies for controlling worker exposures.

That is the minimal amount that can be measured by current equipment, Andrew Maynard, chair of environmental health sciences at the University of Michigan in Ann Arbor, recently told USA Today.

‘As Low as We Can Measure’

“They’ve set the limit as low as we can measure,” Maynard said.

Part of the Centers for Disease Control and Prevention, NIOSH does not mandate standards, but its findings are followed closely by regulatory agencies and private industry.

NIOSH is the leading federal agency that conducts research and provides guidance on the occupational safety and health implications and applications of nanotechnology. Its new recommendations are the first of their kind and follow six years of research on carbon nanofiber and nanotube safety.

Teslan nanocoating
USACE

Tesla NanoCoatings Ltd., of Massillon, OH, has attracted awards and funding for its corrosion control coatings made with fullerene carbon nanotubes (CNTs).

Scope of Research

NIOSH’s  Current Intelligence Bulletin 65: Occupational Exposure to Carbon Nanotubes and Nanofibers:

  • Reviews the animal and other toxicological data on carbon nanotubes (CNTs) and carbon nanofibers (CNFs);
  • Provides a quantitative risk assessment based on animal dose-response data;
  • Proposes a recommended exposure limit (REL) of 1 μg/m3 elemental carbon as a respirable mass 8-hour time-weighted average (TWA) concentration; and
  • Describes strategies for controlling workplace exposures and implementing a medical surveillance program.

Respiratory Hazards

Nanotechnology generally referes to engineered structures, devices and systems between 1 and 100 nanometers long.

Many of technology’s burgeoning first generation of products, including paints and coatings, are composed of engineered nanoparticles, such as metal oxides, nanotubes, nanowires, quantum dots, and carbon fullerenes (buckyballs). Much current coatings research also focuses on nanotechnology.

However, the same teeny size that makes nanoparticles attractive for incorporating into products “may pose a greater health risk than the larger bulk form of these materials,” NIOSH said.

Anti-icing tunnel - Battelle
 

Battelle has been testing a CNT-based anti-icing coating in tunnels that replicate FAA-defined known icing conditions.

“Results from recent animal studies indicate that carbon nanotubes (CNT) and carbon nanofibers (CNF) may pose a respiratory hazard.”

Complicating understanding of the health risks is the tremendous variety in the nanoparticles’ shape, size and chemical composition, NIOSH said.

Adverse Lung Effects

The risks apply to several types of exposures, NIOSH said.

“Occupational exposure to CNTs and CNFs can occur not only in the process of manufacturing them, but also at the point of incorporating these materials into other products and applications,” the agency found.

The agency cites “a number of research studies” that show pulmonary inflammation, “rapidly developing, persistent  fibrosis” and other “adverse lung effects” on rodents from low-dose exposures to CNT and CNF. The particles' carcinogenic potential in animals is still being studied, NIOSH said.

“Although it is not known whether similar adverse health effects occur in humans after exposure to CNT and CNF, the results from animal research studies indicate the need to minimize worker exposure,” NIOSH said.

Tumors in Mice

Just weeks before issuing the new guidance, NIOSH presented the findings of a new study, in which mice were exposed to inhalation of multi-walled carbon nanotubes.

NIOSH cancer study
NIOSH

A new study suggests that carbon nanotubes could be "a cancer promoter."

The study suggested that the nanotubes could increase the risk of cancer in mice exposed to a known carcinogen. NIOSH called the particles “a cancer promoter” but emphasized that the nanotubes alone did not cause cancer in mice.

Nevertheless, the researchers recommended using “prudent practices” such as containment, local exhaust ventilation, filtration, and personal protective equipment, including respirators, in the workplace.

Another NIOSH study, published last August in the peer-reviewed Future of Medicine, suggested that nanoparticle exposures to mice and human cells in the lab produced cellular changes associated with risks for autoimmune disorders like rheumatoid arthritis.

Regulations

Coatings are increasingly turning to nanomaterials, including CNTs. Carbon nanotubes and other nanomaterials have found varied applications in paints, coatings and a wide range of other products. With the trend growing, regulation of these materials is likely in the years ahead.

Many nanoscale materials are already regarded as "chemical substances" under the Toxic Substances Control Act (TSCA).

Meanwhile, in 2010, the Environmental Protection Agency began developing a Significant New Use Rule (SNUR) and other regulations to address potential health and environmental risks from nanoscale materials.

And in December 2012, EPA announced that it would conduct research with the Consumer Products Safety Commission on the health and environmental effects of many nanomaterials.

The Occupational Safety and Health Administration (OSHA) currently includes nanomaterial exposures under its General Industry standards.

   

Tagged categories: Coating chemistry; Containment; EPA; Nano and hybrid coatings; Nanotechnology; NIOSH; OSHA; Personal protective equipment; Research; Respirators; Tesla NanoCoatings

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
International Roofing Expo
 
IRE 2018
 
Attend the IRE where exhibitors and education offer serious solutions, real results and opportunities to make powerful connections. Register for FREE Expo.
 

 
Digital Facilities Corporation
 
Manage the Building Envelope
 
FM-Pro™ is designed to inventory and manage Building Envelope asset information and is suited for building owners, asset area consultants, and product suppliers.
 

 
World of Concrete
 
WOC 2018 – Las Vegas, NV
 
Visit the WOC website for more details about the World of Concrete 2018: January 23-26; Seminars 22-26 at the Las Vegas Convention Center in Las Vegas, NV, USA.
 

 
Atlas Material Testing Technology
 
Helping You Put Your Products To The Test
 
  • Outdoor Accelerated Weathering
  • Laboratory Testing Services
  • Accelerated Weathering Instruments

  • www.atlas-mts.com
    atlas.info@ametek.com
 

 
A&I Coatings
 
Seal n Peel Strippable Coatings
 
Protect your assets with Seal n Peel. Easy to apply and remove. Can be left on for up to 12 months. Water based, enviro mentally friendly.
 

 
PPG Paints
 
PPG PAINTS™ SPEEDHIDE® INTERIOR LATEX
 
This high-hiding, low-VOC, low-odor paint enables a space to be painted while occupied and delivers the durable product performance professionals require.
 

 
KTA-Tator, Inc. - Corporate Office
 
New KTA Pipeline Inspection Kit
 
• Defelsko standard memory body
• Positector FTS 0-250 mils, cabled dry film thickness probe
• NEW Positector Shore D hardness probe
• All essential inspection equipment!
Visit www.ktagage.com
 

 
EMME Controls
 
EMME (Energy Management Made Easy)
 
We are a manufacturer of a temperature control & energy management system which works with most any existing heating & cooling equipment, providing significant value/impact as it relates to comfort & energy savings.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2017, Technology Publishing Co., All rights reserved