Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

Advertisement

Paint BidTracker


D+D News

Main News Page


Spray Foam Uses Hybrid-Cell Technology

Monday, November 28, 2016

More items for Building Envelope

Comment | More

A new spray polyurethane foam insulation product from Rhino Linings (San Diego) uses hybrid-cell technology to create a strong and semi-rigid layer, without some of the problems presented by closed-cell products, the company says.

ThermalGuard OC1.6 is a fast-set, water-blown SPF that expands to 25 times its size in a matter of seconds, the manufacturer says. It has a nominal density of 1.6 pounds per cubic foot at 2 inches, and an R-value of 5.9 per inch.

ThermalGuard application
Rhino Linings

ThermalGuard OC1.6 uses hybrid-cell technology to create a strong and semi-rigid layer, without some of the problems presented by closed-cell products, according to Rhino Linings.

The SPF is a two-component spray consisting of a resin and an isocyanate component; it contains no VOCs, ozone-depleting substances or HFCs, and is PBDE-free as well, according to Rhino Linings.

Structural Strength, Fewer Challenges

Like a closed-cell SPF, ThermalGuard OC1.6 maintains structural strength once it sets, and is recommended by the manufacturer for residential and commercial structures as well as exterior or foundation insulation, below-grade applications and tank exteriors.

"Our new hybrid product, ThermalGuard OC1.6, boasts the semi-rigid appearance and compressive strength of a standard 245fa-blown 2-pound closed cell spray foam without the closed-cell product challenges like off-gassing in the drum or the inability to recirculate and pre-heat material when conditions warrant," said Pierre Gagnon, Rhino Linings’ president and CEO.

The new product bridges the gap between Rhino Linings’ open-cell, lower-density sprays and its closed-cell, more rigid products, the company notes. It can replace a 2.0-pound density spray, the company says, in applications where a lower-cost, semi-rigid foam is desired.

The product comes in twin 55-gallon drums.

More information: spf.rhinolinings.com.

   

Tagged categories: Energy efficiency; Insulation; Polyurethane; Rhino Linings; Spray polyurethane foam; Two-component coatings

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
PPG Paints
 
PPG PAINTS™ SPEEDHIDE® INTERIOR LATEX
 
This high-hiding, low-VOC, low-odor paint enables a space to be painted while occupied and delivers the durable product performance professionals require.
 

 
Digital Facilities Corporation
 
Manage Wall Systems with
FM-Pro
 
FM-Pro™ is designed with a comprehensive wall asset area module to inventory and manage Wall systems, including fenestration details, and is suited for building owners, façade area consultants, and product suppliers.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2018, Technology Publishing Co., All rights reserved