Durability + Design
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

Advertisement

Durability + Design (D+D)


DURABILITY + DESIGN BLOG

Comment |

Writing Specifications in a Vacuum

FRIDAY, APRIL 21, 2017

By Bob Bailey, AIA, CCS


More items for Good Technical Practice

A 19th century Scotsman said, “Do not isolate yourself. Be among men and things, and among troubles, and difficulties, and obstacles.”

The quoted individual was never involved in building design and construction, but the essence of his statement is a good admonition for those of you writing construction specifications—especially you full-time scriveners.

It’s easy to get consumed by writing specifications to the point of seldom getting out to jobsites to see construction and participate in construction issues.

©iStock / andresr

Meetings can be useful for a specification writer to attend, particularly if time has been spent working through the requirements of the specification with the project architect.

Sure, we can read technical publications, attend seminars and talk to product representatives, but there’s no substitute for watching the materials or products you specify being installed on the job site: to see how the product is shipped and handled, how installers work with the product, and how the interface with other materials occurs.

These observations give insight into what really happens versus the sometimes idealistic and/or overwrought language of the specifications. They help you to avoid the “Ivory Tower School” of spec writing.

Working Together

I was reminded of this recently. I was onsite to review proposed detailing solutions that were going to vary from the construction documents because of the way construction sequencing was occurring.

The primary concern was the air barrier. The GC’s project manager had called a meeting that included the subcontractors whose work touched the air barrier, the air barrier installer, the air barrier manufacturer’s technical rep and the architect. What was particularly gratifying was the willingness of each of the subs to cooperate to ensure a successful outcome.

We’ve all been on jobs where the subcontractors were contentious, preferred to point fingers and disavow responsibility, and/or waste time rather than work together for the best possible outcome.

©iStock / NicoElNino

Sure, we can read technical publications, attend seminars and talk to product representatives, but there’s no substitute for watching the materials or products you specify being installed on the job site.

The air barrier installer could have complained to the GC’s project manager about letting the sequencing of abutting products occur the way it did. Instead, there was a concerted effort to make sure a continuous line of protection would be in place.

Seeing the various subs spell out how they were adjusting their work to make this happen was valuable. It reinforced the things they are thinking about that we may gloss over as we are editing the specs. It also pointed out the need to involve technical reps in the conversation as you prepare the specifications, so that you are not writing requirements into the specs that are never going to happen because the project details and application will dictate otherwise.

Many products and materials are conducive to pre-installation conferences as complexity and scope warrants. These meetings can be useful for a specification writer to attend, particularly if time has been spent working through the requirements of the specification with the project architect. And, of course, walking the job with the GC before or after a progress meeting is usually beneficial to observe the prosecution of the work.

It can be tricky to arrange, but a specifier should try to see every job that they’ve done specs for at least once. Seeing construction taking place keeps a spec writer grounded, and it can help produce better, more meaningful specifications.

ABOUT THE BLOGGER

Bob Bailey, AIA, CCS

A full-time specifier for more than 25 years, Bob Bailey, AIA, CCS, CSI, LEED AP, is Specifications and Constructability Specialist for IKM Inc. of Pittsburgh, PA. An award-winning specifications writer, Bob is the founder of the Pittsburgh Specifiers' Roundtable and immediate past president of CSI Pittsburgh. His professional passions: continuing education and internship development. Contact Bob.

SEE ALL CONTENT FROM THIS CONTRIUBTOR

   

Tagged categories: Architecture; Contractors; Specifiers; Subcontractors

Comment from Robert Aird, (4/24/2017, 6:32 AM)

Bob, thank you for this sage advice. It is all too uncommon for effective pre-con meetings to take place to coordinate scopes, ensure material compatibility, and that the end product will perform as intended.


Comment from Ross Spiegel, (4/25/2017, 11:09 AM)

Bob, great insight. I share your sentiments having spent a good deal of my career not only writing specifications but doing contract administration. Nothing makes you realize the importance of what you write more clearly than a day in the field.


Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
KTA-Tator, Inc. - Corporate Office
 
KTA Analyzes
Coating Failures
 
• Field Diagnosis
• Lab Diagnosis
• Determination of Cause
• Recommendations
www.kta.com
800-245-6379
 

 
PPG Paints
 
SPEEDHIDE® PRO-EV ZERO INTERIOR PAINT
 
For a dependable, VOC-free interior paint, professionals who are both performance-conscious and cost-conscious rely on PPG PAINTS™ Speedhide Pro-EV zero.
 

 
Atlas Material Testing Technology
 
Helping You Put Your Products To The Test
 
  • Outdoor Accelerated Weathering
  • Laboratory Testing Services
  • Accelerated Weathering Instruments

  • www.atlas-mts.com
    atlas.info@ametek.com
 

 
Pratt & Lambert Paints
 
Trusted Performance with Proven Results
 
Pratt & Lambert’s finest, Accolade® Premium Paint & Primer, applies flawlessly with superb hide and long-lasting durability for great results, every time.
 

 
A&I Coatings
 
Vitreflon – the hallmark of colour stable protective coatings
 
Vitreflon two pack fluoropolymer coatings display unsurpassed colour and gloss retention making Vitreflon the coating of choice for high value infrastructure and architecture. Contact us today to find out how Vitreflon can outperform on your next project. Vitreflon distributorships available.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@durabilityanddesign.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 

© Copyright 2012-2017, Technology Publishing Co., All rights reserved